Nitto Adhesive Tape
Nitto No.5000NS, 5500, 5025 and other nonwoven/film-based double-sided tapes with low-fog, low-odor acrylic adhesive — soft conformability, reworkable with low residue. Uniform thickness for optical modules, display panels, and cleanroom assembly. Balances adhesion strength with removability.
Key Features
- Low fog, low odor — meets optical-grade cleanliness
- Flexible conformability, reworkable without residue
- Uniform thickness, stable and reliable bonding
- Ideal for optical module cleanroom assembly
Applications
Optical/display module assembly · Appliance panel mounting · General electronics precision assembly · Camera module fixing
Material Tags
Technical Parameters
| Brand | Nitto |
|---|---|
| Common Models | No.5000NS, 5500, 5025 |
| Substrate | PET / Nonwoven |
| Thickness Range | 0.03–0.15 mm |
| Temperature Range | −40 ~ 120 °C |
| Adhesive Type | Acrylic |
| Die-Cutting Tolerance | ±0.10 mm |
Frequently Asked Questions about Nitto Adhesive Tape
Common questions about die-cutting and material selection for this product
What's the difference between 3M 467MP and 468MP die-cutting?
467MP is approx. 0.05mm thick, 468MP approx. 0.13mm. The ultra-thin 467MP tends to curl and stretch during die-cutting, requiring precision equipment with tension control. The slightly thicker 468MP is easier to strip waste from. Their release liners differ, so waste removal angle and speed need separate tuning.
How to prevent adhesive oozing after 3M tape die-cutting?
Adhesive oozing is usually caused by dull tooling or improper waste removal direction. Solutions: use sharp dies (etching dies recommended), adjust pressure to just cut through the adhesive without damaging the liner, use a lower-release liner, and control waste removal speed and angle (45-60 degrees recommended).
Why does VHB foam tape expand after die-cutting?
VHB foam has compression recovery properties, causing 0.1-0.3mm dimensional rebound after die-cutting. Solutions: compensate by making die clearance 0.05-0.1mm smaller than tape thickness, and let parts rest 24 hours before measuring to meet design tolerances.
What parameters are needed for 3M tape die-cutting quotes?
Please provide: 3M model number (e.g., VHB 5952, 467MP), substrate thickness, adhesive type (acrylic/modified acrylic), liner type (paper/film), product drawing with tolerances, estimated quantity, and application. The more complete the information, the faster the quote and prototyping.
Have more questions? Our technical team is ready to provide one-on-one consultation
Contact Us